How to open dodge challenger trunk without a key

Are you looking to open your Dodge Challenger’s trunk without using a key? there are a few methods you can try. First, you can check to see if your car has an automatic trunk release button.

This button is usually located on the driver’s side door panel or near the steering wheel. If your car doesn’t have an automatic trunk release button, you can try using the emergency trunk release lever. This lever is located inside the car, on the ceiling near the back seat.

How to open dodge challenger trunk without a key

If you’re in a bind and need to open your trunk without your key, there are a few ways you can do it.

One way is to use a screwdriver or another slim object to press the trunk release button. The button is usually located near the bottom of the driver’s side door opening. If you can’t find it, consult your car’s manual.

If you have an emergency trunk release lever, that’s another way to open your trunk without using your key. The location of the lever varies by car model, but it’s usually inside the trunk itself, near the latch.

Another way is to disconnect the battery. This will disable the electronic lock on the trunk, allowing you to open it manually. However, this method should only be used as a last resort, as it will also disable other electrical components in your car.

See also  Dodge challenger oil type "Find the Right Engine Oil for Maximum Performance"

Step 1: find the trunk release button

1. Look for the trunk release button inside the car. It should be near the driver’s seat.

2. If you can’t find the button, look for the emergency trunk release lever. This is usually located in the glove box or near the rear seats.

3. Once you’ve found the trunk release button or lever, press it to open the trunk.

If your Dodge Challenger doesn’t have an automatic trunk release, you’ll need to use a key to open it. Just insert the key into the lock and turn it to unlock the trunk.

Step 2: use a flathead screwdriver to press the button

1. Locate the manual release button. It should be on the inside of the trunk, near the latch.

2. Use a flathead screwdriver to press the button.

3. The trunk should now be open. If it isn’t, check to make sure the button is fully depressed and try again.

Step 4: Use the emergency trunk release handle

If your Dodge Challenger has an emergency trunk release handle, follow these steps to open the trunk without a key:

See also  Dodge charger scat pack tire stickers "Let Your Tires Speak"

1. Locate the emergency trunk release handle on the floor of the trunk, near the back seat.

2. Pull the emergency trunk release handle to open the trunk.

3. If the emergency trunk release handle is not working, use a flat-head screwdriver to pry open the trunk latch.

4. Once the trunk is open, press the button on the key fob to close it. Step

5: Use the emergency trunk release cable If the key fob is not working, you can use a special emergency trunk release cable to open the trunk.

Follow these steps:

  • 1. Locate the emergency trunk release cable on your Dodge Challenger. It is located in the trunk, underneath the carpet.
  • 2. Locate a part of the cable that will allow you to get a firm grip on it.
  • 3. Pull the emergency trunk release cable out from under the carpet and press it firmly into the hole on top of the latch.

FAQs about How to open the dodge challenger trunk without a key

1. How do I open the trunk of my Dodge Challenger without a key?

See also  Dodge Performance Chips"Positive Potential of your Vehicle With a Dodge Chip InstallDodge Performance Chips

If you don’t have a key, you can use a flathead screwdriver to open the trunk. Just insert the screwdriver into the keyhole and turn it clockwise.

2. Is it possible to open the trunk of a Dodge Challenger without a key?

Yes, it is possible to open the trunk of a Dodge Challenger without a key. You can use a flathead screwdriver to open the trunk. Just insert the screwdriver into the keyhole and turn it clockwise.

3. How can I open the trunk of my Dodge Challenger if I don’t have a key?

If you don’t have a key, you can use a flathead screwdriver to open the trunk. Just insert the screwdriver into the keyhole and turn it clockwise.

4. What do I do if I don’t have a key to open the trunk of my Dodge Challenger?

If you don’t have a key, you can use a flathead screwdriver to open the trunk. Just insert the screwdriver into the keyhole and turn it clockwise.

5. How do I open the trunk of my Dodge Challenger if I lost my key?

If you lost your key, you can use a flathead screwdriver to open the trunk. Just insert the screwdriver into the keyhole and turn it clockwise.